Hitachi CP-X8150 - Main Window

43
3. Web Control
3.2 Crestron e-Control
®
(continued)
3.2.1 Main window
You can operate the basic controls of the projector on this screen.
• If the projector is in the standby mode, only the [Power] button can
be operated.
NOTE
1 Click a button and operate as follows.
Button 'HVFULSWLRQ
Power Turns the power on/off.
9RO9RO Adjusts the volume setting.
Mute Turns the audio mute on/off.
2 Sources List
You can click a button to switch the input channel. The cursor will move
according to the currently selected input port.
Button 'HVFULSWLRQ
Computer in1 Selects input from COMPUTER IN1 port.
Computer in2 Selects input from COMPUTER IN2 port.
LAN Selects input from LAN port.
USB Type A Selects input from USB TYPE A ports.
USB Type B Selects input from USB TYPE B port.
+'0, Selects input from +'0, port.
+'0, Selects input from +'0, port.
Component Selects input from COMPONENT port.
69LGHR Selects input from 69,'(2 port.
9LGHR Selects input from 9,'(2 port.
1
4
2
3