Hitachi CP-X8150 - Page 170

35
3.1 Projector Web Control - Projector Control (continued)
Item 'HVFULSWLRQ
INPUT (continued)
COMPUTER IN -
COMPUTER IN1
Selects the COMPUTER IN1 input signal type.
COMPUTER IN -
COMPUTER IN2
Selects the COMPUTER IN2 input signal type.
FRAME LOCK -
COMPUTER IN1
Turns the FRAME LOCK-COMPUTER IN1 function on/off.
FRAME LOCK -
COMPUTER IN2
Turns the FRAME LOCK-COMPUTER IN2 function on/off.
)5$0(/2&.+'0, Turns the FRAME LOCK-HDMI 1 function on/off.
)5$0(/2&.+'0, Turns the FRAME LOCK-HDMI 2 function on/off.
SETUP
AUTO KEYSTONE
EXECUTE
Performs the automatic keystone distortion setting.
.(<6721(9 Adjusts the vertical keystone distortion setting.
KEYSTONE H Adjusts the horizontal keystone distortion setting.
PERFECT FIT
Adjusts the shape of the projected image in each of the
corners and sides.
$872(&202'( Turns on/off the automatic eco mode function.
(&202'( Selects the eco mode.
INSTALLATION Selects the installation status.
67$1'%<02'( Selects the standby mode.
MONITOR OUT -
COMPUTER IN1
Assigns the MONITOR OUT when the COMPUTER IN1 input
port is selected.
MONITOR OUT -
COMPUTER IN2
Assigns the MONITOR OUT when the COMPUTER IN2 input
port is selected.
MONITOR OUT - LAN
Assigns the MONITOR OUT when the LAN input port is selected.
MONITOR OUT -
USB TYPE A
Assigns the MONITOR OUT when the USB TYPE A input
port is selected.
MONITOR OUT -
USB TYPE B
Assigns the MONITOR OUT when the USB TYPE B input
port is selected.
MONITOR OUT -
+'0,
Assigns the MONITOR OUT when the +'0, input port is
selected.
MONITOR OUT -
+'0,
Assigns the MONITOR OUT when the +'0, input port is
selected.
MONITOR OUT -
COMPONENT
Assigns the MONITOR OUT when the COMPONENT input
port is selected.
MONITOR OUT -
69,'(2
Assigns the MONITOR OUT when the 69,'(2 input port is
selected.
021,7252879,'(2 Assigns the MONITOR OUT when the 9,'(2 input port is selected.
MONITOR OUT -
67$1'%<
Assigns the MONITOR OUT in the standby mode.
(continued on next page)
3. Web Control