20
4.5Basic Method of Operation
This subsection describes the basic operating method of maintenance work.
Execute various types of maintenance work by depressing (mode key), then entering a corresponding
mode No. and depressing (set key).
To end the ongoing maintenance work, depress key, enter the corresponding mode No. and depress
(reset key) . For functions, refer to the attached List of Mode Functions and the Technical
Comment for Installation and Maintenance for respective machine types.
Example) Entry procedures for the operation for measuring the height of a story (MODE – 11 – SET)
MODE
W
SET
RESET
MODE
W
Operation state indication
Standby for the entry of function
No. (No indication)
(Depress MODE key)
Mode No. 11 indication
(Depress key 1)
(Depress key 1)
Execution of function No. 11 (returns
to the operating state indication)
MODE
W
１
１
SET
(Depress SET key)
4. Elevator / Escalator Mode
To Next Page
