Hitachi HA800 G3 Series - Re-Enabling Intelligent Provisioning

F10 mode options
10
• Boot BIOS Mode
• System Date
• System Software Update
• System Time
• Provide anonymous usage and error feedback to help improve this product
2. Click Next .
3. Read the EULA, and then select Accept Intelligent Provisioning EULA .
4. Click Next .
5. Enter the following information:
• Automatically optimize your server
NOTE: Required fields differ if you do not select Automatically optimize your server .
• What will this server be used for?
• Enable F10 functionality
Provide anonymous usage and error feedback
• Enable automatic application of software and firmware updates to this system
6. Click Next .
7. Enter the following information:
• Choose Network Interface for Updates and Installs
• Use Proxy
• DHCP Auto-configuration : Deselect this option to manually enter DHCP settings, including using IPv6 protocol.
8. To save the changes, click Next , iLO network setting is available to change.
9. Click Submit .
Re-enabling Intelligent Provisioning
Procedure
1. Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server
Security
> Intelligent Provisioning (F10 Prompt) , and then press Enter .
3. Select Enabled .
4. Click Save & Exit , and then reboot the server.