A browser does not import a deployment profile correctly
Symptom
Intelligent Provisioning does not import a deployment profile correctly.
Action
Verify that the profile is saved as a
.txt
file format.
Some Legacy BIOS Mode installs need specific instructions
If the server boot mode is set to Legacy BIOS Mode, some operating systems need specific installations.
NOTE:
Legacy BIOS Mode behavior cannot be modified by pressing
F10
. If you are doing a manual installation in Legacy
BIOS Mode, ensure that:
•
On Windows systems, the system boots to the DVD.
•
On Linux and VMware systems, the system boots to the hard drive.
NOTE:
Change the boot order or press
F11
during the boot process.
Always On Intelligent Provisioning does not display status of NICs
Symptom
When viewing NICs in Always On Intelligent Provisioning, the NIC does not display the status.
Action
1.
Check the status of the NIC options in the iLO page or RBSU.
2.
Select the port in AOIP, and then continue with the installation.
Cannot create a custom partition size
Symptom
When installing an OS, you cannot create a custom partition size.
Action
1.
In 3.50 version, the user is allowed to perform manual partition before the OS installation begins. However, manual
partition is not supported for the following cases:
•
All the versions of
VMware
, in both
UEFI
and
Legacy
modes.
•
All the versions of
Windows/Hyper-V Server
in
Legacy
mode.
To Next Page
Loading...
