Accessing Intelligent Provisioning
Accessing Intelligent Provisioning
Accessing Intelligent Provisioning from the iLO web interface
Procedure
1.
Open a browser and enter https://<iLO host name or IP address> to log in to the iLO web interface.
2.
Enter a user account name and password, and click
Log In
.
3.
From the navigation tree, click
Lifecycle Management
.
4.
Navigate to the
Intelligent Provisioning
tab and then click
Always On
button.
The Intelligent Provisioning web interface opens in a new browser window.
Accessing Intelligent Provisioning using an iLO remote console
session
Procedure
1.
Open a browser and enter https://<iLO host name or IP address> to log in to the iLO web interface.
2.
From the iLO web interface, navigate to the
Remote Console & Media
page.
3.
Verify that your system meets the requirements for using the remote console application you want to use.
4.
Click the launch button for your selected application.
•
.Net Console
•
HTML5 Console
•
Java IRC Web Start
Alternatively, you can click an Integrated Remote Console link on the
Information - iLO Overview
page.
5.
Restart or power on the server.
The server restarts and the POST screen appears.
6.
Press
F10
when prompted during the server POST.
7.
Select
Intelligent Provisioning
.
When accessing Intelligent Provisioning, one of the following happens:
If you are using Intelligent Provisioning for the first time, the First Time Setup wizard will guide you through initial
configuration and registration tasks. For more information, see
Using the First Time Setup wizard
.
To exit Intelligent Provisioning, reboot the server by clicking the power icon at the top right of the page.
To Next Page
Loading...
