Reinstalling from an RPM package (Linux only)
Prerequisites
•
For SLES 15.x series, before the installation the user might needs to install gptfdisk, sdparm, and mdadm.
•
For RHEL 8.x series, before the installation the user might needs to install sdparm.
NOTE:
Not supported on RHEL 8.0.
Procedure
1.
Download the RPM package file for the latest Intelligent Provisioning recovery RPM package from the SDR website ().
2.
Execute the command:
rpm -i firmware-intelligentprovisioning-<version>.x86_64.rpm
3.
Execute the command:
cd /usr/lib/x86_64-linux-gnu/firmware-intelligentprovisioning-ip-<version>/
4.
Execute the command:
#./hpsetup
5.
Execute the command:
#reboot
To Next Page
Loading...
