Performing maintenance
31
Procedure
1.
Do one of the following:
a.
To use the deployment, you created on the same server, click
Deploy
.
b.
To use a previously created deployment that does not exist on this
server: Select
Deployment Settings
>
Import
.
•
From Network Share
enter:
◦
Server Name or IP Address
—Server name or IP address of the server that hosts the OS contents. If a
server name is specified, a DNS entry is also required.
◦
Share Name
—The name of the network share using Server Message Block (SMB) protocol that hosts the
OS contents.
◦
Domain Name
—Name of the domain that hosts the network share.
◦
Network Share User
—User name used to access the network share.
◦
Network Share Password (not encrypted) and Confirm Password
—Password for the user name used to
access the network share.
•
From USB Drive
I.
Insert the USB key containing the deployment.
II.
Select the deployment from USB and click
Next
.
III.
Click
Deploy
.
NOTE:
The newly imported deployment is added with the prefix "New Import".
Deployment Settings actions
Icon Description
Click the
Deploy
icon to launch the automatic configuration utility.
Click the
Edit
icon to change the following options:
•
Version Information
•
Operating System parameters
•
Intelligent Provisioning Preferences
•
Array Configuration information
•
ROM Settings
•
Hardware Validation Tool
Click the
Delete
icon to delete the selected deployment.
Click
Download
to download the performance package to a network share or a
USB drive.
To Next Page
Loading...
