Hitachi HA800 G3 Series - About Ilo Configuration; Administration

Performing maintenance 33
About iLO Configuration
The iLO Configuration page allows you to change some iLO configurations from the Intelligent Provisioning. For a
description on iLO configuration, contact customer support. Intelligent Provisioning provides the following options to
configure the iLO:
• Display iLO Self-Test
• iLO Federation
• Remote Console & Media
• iLO Dedicated Network Port
• iLO Shared Network Port
• Administration
• Security
• Management
• Reset Options
Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance -> iLO configuration .
2. To navigate to different pages, click the menu.
3. Change the columns.
4. Click Save Settings button to update.
For Administrator and Rest , see the following sections.
Administration
Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration > Administration .
2. Configure the following settings:
• View user's permission
• Create account
• Edit account
• Delete account
• Available permissions are listed below:
◦
Login : Enables a user to log in to iLO.
◦
Virtual Power and Reset : Enables a user to power-cycle or reset the host system. These activities interrupt
the system availability. A user with this privilege can diagnose the system by using the
Generate NMI to
System
button.
◦
Host BIOS : Enables a user to configure the host BIOS settings by using the UEFI System Utilities. This privilege
is required for replacing the active system ROM with the redundant system ROM.
This privilege does not affect configuration through host-based utilities.