Hitachi HA800 G3 Series - Page 35

Performing maintenance 34
◦ Administer User Accounts : Enables a user to add, edit, and delete local iLO user accounts. A user with this
privilege can change privileges for all users. If you are not assigned this privilege, you can view your own
settings and change your own password. For more information, see Hitachi Advanced Server HA800 G3
Series iLO 5 User Guide posted at
https://knowledge.hitachivantara.com/Documents/Servers .
◦ Host Storage : Enables a user to configure to host storage settings.
This privilege does not affect configuration through host-based utilities.
◦
Remote Console : Enables a user to remotely access the host system Remote Console, including video,
keyboard, and mouse control.
◦
Virtual Media : Enables a user to use the Virtual Media feature in the host system.
◦
Configure iLO Settings : Enables a user to configure most iLO settings, including security settings, and to
remotely update the iLO firmware. This privilege does not enable local user account administration.
After iLO is configured, revoking this privilege from all users prevents reconfiguration from the following
interfaces:
– iLO web interface
– iLO RESTful API
– CLI
– HPQLOCFG
Users who have access to the following interfaces can still reconfigure iLO:
– UEFI System Utilities
– HPONCFG
Only a user who has the Administer User Accounts privilege can enable or disable this privilege.
◦
Host NIC : Enables a user to configure the host NIC settings.
This privilege does not affect configuration through host-based utilities.
◦
Recovery Set : Enables a user to manage the System Recovery Set.
By default, the Recovery Set privilege is assigned to the default Administrator account. This privilege can be
added to a user account only by creating or editing the account with an account that already has this privilege.
If there is no user account with the Recovery Set privilege, and an account with this privilege is required, reset
the management processor to the factory default settings. The factory default reset creates a default
Administrator account with the Recovery Set privilege.
This privilege is not available when iLO security is disabled with the system maintenance switch.
The following privileges are not available through the CLI or RIBCL scripts:
– Host NIC
– Host Storage
– Recovery Set
– Host BIOS
– Login
The following privileges are not available through the iLO 5 Configuration Utility in the UEFI System Utilities:
– Recovery Set
– Login
3. Click Update User button to save configuration.