Hitachi HA800 G3 Series - Creating a Deployment Settings Package; Using Deployment Settings Package to Configure a Single Server

Performing maintenance 30
Procedure
1. On the Intelligent Provisioning home screen, click Perform Maintenance .
2. Select Deployment Settings from the maintenance options.
When you open Deployment Settings, you can choose to manage an existing Deployment Settings profile or create a
new one based on existing deployment settings.
More information
About Hardware Validation Tool
Creating a Deployment Settings package
Creating a Deployment Settings package
Procedure
1. On the Deployment Settings screen, do one of the following:
a. To create a new customized profile, click Create New Deployment , and navigate the deployment settings screens
to complete the settings in the following steps.
b. To edit an existing customized profile, click the Pencil icon in the end of each row.
2. Enter a Deployment Name —Enter a name for this deployment package. Do not include spaces or special characters.
3. Enter User Notes and Captured From details.
4. Enter an Operating System :
a. Click Create button.
b. Select the Install source .
c. Select the Install media or OS type .
d. Configure OS settings.
e. Select Use Automation Controller Setting or not.
f. Configure partition table.
g. Click Save button if everything is correct.
5. Enter the ROM Settings — See Using the BIOS Configuration (RBSU) utility .
6. Enter the Storage Controller Settings .
7. Enter Intelligent Provisioning Preferences —See Setting Intelligent Provisioning Preferences .
8. Enter Hardware Validation Tool — Select Hardware Validation Tool options for each deployment.
9. Click Save button to save the profile.
Using Deployment Settings package to configure a single server
About this task
IMPORTANT: Do not interrupt the configuration process.