Performing maintenance
29
6.
Select the USB key from the
Removable Device to Save Log to
list.
7.
Define the period for which to retrieve data by selecting the
From
and
To
dates. Retrieve seven days of data,
which creates a 10 MB to 15 MB file.
8.
Click
Download Logs
to save the data to the USB key.
NOTE:
Do not remove the USB key until the download has completed and the media lights clear.
Uploading an AHS log
Prerequisites
IMPORTANT:
The server from which the AHS log was created must have a valid warranty. If the server is out of
warranty, an error message is displayed: Server is not Entitled. Check these options for renewing your license.
The options include:
•
Buy more licenses.
•
Find partner for license purchase.
•
Contact customer support.
About this task
The maximum file size limit is 250 MB. For logs that are larger than 250 MB, contact customer support for
assistance.
Perform this task.
Procedure
1.
Select
Upload AHS Log
.
2.
Navigate to your log file, and then click
Open
.
A window is displayed that shows parsing and log loading states. As the AHS log loads, the screen displays the
estimated time of completion.
TIP:
This window also displays videos for different platforms. You can search and play different videos while
you are waiting for the log file to load.
To cancel the load process, click
Cancel
.
Using Deployment Settings
About this task
The Intelligent Provisioning
Deployment Settings
page enables you to create server configuration packages. You can
deploy the packages using a USB key or iLO Scripting to one or more Advanced Servers. Using
Deployment Settings
is
an alternative to using the Scripting Toolkit or iLO RESTful Interface Tool.
NOTE:
Some browsers do not import Deployment Profiles correctly. Use the extension
.txt
to ensure browser
compatibility.
To Next Page
Loading...
