Hitachi Advanced Server HA820 G2 User Guide 103
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION
:
To prevent damage to electrical components, properly ground the server before beginning
any installation procedure. Improper grounding can cause ESD.
2. Power down the server.
3. Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
4. Remove the access panel.
5. Remove the air baffle.
6. Remove the fan cage.
7. Remove the blank.
8. Install the drive cage:
a.
Remove all drive blanks.
b.
Install the drive cage.
To Next Page
Loading...
