Hitachi HA820 G2 - Processor and Heatsink Installation

Hitachi Advanced Server HA820 G2 User Guide 121
7. Cable the drive backplane.
8. Install drives or drive blanks.
9. Install the access panel.
10. Slide the server into the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server.
The installation is complete.
Processor and heatsink options
Installing a processor heatsink assembly
Prerequisites
Before installing this option, be sure that you have the following:
• The components included with the option kit
• T-30 Torx screwdriver
Procedure
1. Review the heatsink and socket components.
2. Observe the following alerts.