Hitachi Advanced Server HA820 G2 User Guide 81
6.
Install high-performance fans in all fan bays.
7.
Install the air baffle.
8.
Install the access panel.
The installation is complete.
Drive options
When adding hard drives to the server, observe the following general guidelines:
•
The system automatically sets all device numbers.
•
For drive numbering, see Drive bay numbering.
•
If using only one hard drive, install it in the bay with the lowest device number.
•
To provide the greatest storage space efficiency, group identical capacity drives into the same
drive array.
•
The NVMe SSD is a PCIe bus device. Do not remove NVMe drives without allowing the device to
cease activity. Removing the drive while active can cause data loss.
To Next Page
Loading...
