Hitachi Advanced Server HA820 G2 User Guide 60
Procedure
1.
Release the cable management arm to access the rear panel.
2.
Remove the blank.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the power supply or power
supply blank to cool before touching it.
3.
Insert the power supply into the power supply bay until it clicks into place.
4.
Connect the power cord to the power supply.
5.
Secure the power cord in the strain relief strap attached to the power supply handle:
a.
Unwrap the strain relief strap from the power supply handle.
CAUTION:
Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable.
Never bend power cords and server cables tight enough to cause a crease in the sheathing.
b.
Secure the power cord with the strain relief strap.
Roll the extra length of the strap around the power supply handle
.
To Next Page
Loading...
