Hitachi RPI-5.0FSN4E - Page 100

2 Unit installation
88
SMGB0077 rev.0 - 01/2013
Specications
Part F-71L-D1 F-160L-D1
Applicable indoor unit model 1.0 to 2.5 3.0 to 6.0
Dust collection efciency (%) 50 (gravimetric method)
Air ow rate (m
3
/min) 22.0 35.0
Initial pressure loss Pa 19.0 36.0
Final pressure loss Pa 48.0 78.0
Filter/frame colour Pink/Silver
Working life 3 years (with maintenance every 3-6 months)
Reuse Available (dried by sunlight)
(*1)
Cleaning Available (washed with water)
(*2)
Weight (kg) 0.8 1.2
Performance Absorbs smoke, body odour, etc.
Filter material
Antibacterial ber
Acrylate Fiber 1 (Absorbed ber for basic gas)
Acrylate Fiber 2 (Absorbed ber for acidic gas)
Reinforce net PP/PE
Reinforce sheet PP
Applicable lter box (option) B-160H2
Restrictions of use Washing with detergents is forbidden
(*1)
This is the standard working life of the lter and its duration may vary depending on the conditions of use. Clean the lter
with water or neutral detergent.
(*2)
Wash the lter with water or neutral detergent to avoid reducing the absorption capacity.
For RCI-FSN3Ei indoor units: F-23L4-D and F-46L4-D
The dimensions of the deodorising lter are indicated in the
following gure.
Remember that the lter thickness depends on the model.
Model a (mm)
RCI-(1.5-2.5)FSN2E 26
RCI-(3.0-6.0)FSN2E 42
To t the lter, you must install the lter box.
N O T E
Whenusingthislter,settheairowtohighspeedusingtheremotecontroltomaintainthenecessaryvolume
of air.