10.10.3 Standard connection system and central station
Standard connection Central station PCS-5S
Example of systems
Description of the
systems
Capable of controlling up to 16 indoor
units and total heat exchanger units
Capable of controlling with PC-ART
directory
Capable of controlling up to 256
indoor units formed by 16 refrigeration
series
System components PC-ART remote control PC-ART remote control PC-ART remote control
Standard connection Central station PCS-5S
Switch remote control setting PC-ART PC-ART Central station PC-ART
Switch remote control settings
A/C
+VENTI
A/C VENTI VENTI
A/C
+VENTI
A/C
A/C
+VENTI
VENTI
Functions
RUN/STOP
A/C
O
O X X
O
O
O
O
Total heat
exchanger
X O O X X
FAN SPEED
A/C
O
O X X
X
(1*) (1*)
O
O
Total heat
exchanger
X O O X
VENTI MOD
(ventilation
mode)
Automatic
O X O O X
(2*)
X O X
Total heat
exchanger
Ventilation bypass
Pre-cooling
Pre-heating
O X – – X
(2*)
X O X
Air volume increase O X O O X
(2*)
X O X
Filter signal O O O O X X O O
N O T E
O: available
X: not available
–: not used
•
(1*)
: the PSC-5S station cannot change the unit fan speed.
•
(2*)
: remote control settings table. Set the number of all indoor units respectively and in series using RSW1 and
DSW5 (indoor unit).
• If H-LINK is used, assign a refrigeration number to each total heat exchanger.
• In the case of CSNET WEB, it is not possible to use AUTO COOL/HEAT.
• If the ON/OFF function of the remote control (optional function) is used, the total heat exchanger cannot be
used.
10 Servicing
351
SMGB0063 rev. 1 - 10/2010
10
To Next Page
Loading...
Need help?
General
