Number Tool Remarks
17
Cleaning water manifold
• Duct type.
• Built-in 2-way
• Wall type.
• Ceiling type.
• The inside of the Ø120 hole must be covered
with a piece of felt to insert the nozzle of the
gun.
18 Cleaning water manifold kit Built-in 4-way
Necessary cleaning materials.
The necessary cleaning materials for all indoor units are described
below.
Number
No. Material Remarks Quantity
1
Container with access
panel
Vinyl chloride sheeting
1 mm thick, with a 0.3 mm access
panel
1
2 Bracket A Stainless steel — 8
3 Sheeting A Vinyl chloride sheeting
1 mm in thickness, with support B
and magnet
1
4 Sheeting B Vinyl chloride sheeting
1 mm in thickness, with support B
and magnet
1
5 Sheeting C Vinyl chloride sheeting
1 mm in thickness, with support B
and magnet
1
6 Sheeting D Vinyl chloride sheeting
1 mm in thickness, with support B
and magnet
1
7 Motor panel Vinyl chloride sheeting 1 mm in thickness with magnet 1
8 Motor flange Vinyl chloride sheeting
1 mm in thickness, invisible
adhesive tape
1
9 Wiring panel Vinyl chloride sheeting — 1
10 Gloves Vibrations — 1
11 Sling cable — 4
12 Maintenance notes
385
SMGB0063 rev. 1 - 10/2010
12
To Next Page
Loading...
