Hitachi SJ300 Series

12
OPERATION and PROGRAMMING
Shows drive status.
Press to run the motor.
Press to stop the drive or
reset an alarm.
Lights when the power input
to the drive is ON.
Indicates the unit associated
with the parameter display.
Press to write the new value
to the EEPROM.
Press up or down to sequence
through parameters and func-
tions shown on the display, and
increment/decrement values.
Press to set or monitor a
parameter value.
Parameter Display Power LED
Display Unit LEDs
Store Key
Up/Down Keys
Monitor LEDs
RUN Key
STOP/RESET Key
Function Key
Displays frequency, motor cur-
rent, rotational speed of the
motor, and an alarm code.
SJ300 Series can be easily operated with the digital operator
(
OPE-S
)
provided as standard. The digital operator can also
be detached and can be used for remote-control. Multilingual
(
English, French, German, Italian , Spanish and Portuguese)
operator with copy function
(
SRW-0EX
)
and digital operator with potentiometer
(
OPE-SR
)
are also available as options.
(
For US version, OPE-SRE
(
English overlay with potentiometer
)
is provided as standard.
)
（1） or the value previously
monitored is displayed.
（2）Function code appears.
（3）appears.
（5）appears.
（6）Preset value is displayed.
（7）Newly set value is displayed.
（8）Returns to and
the setting is complete.
（1） or the value previously
monitored is displayed.
1.Setting the maximum output frequency
2.Monitoring output current value
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Hz
V
A
%
POWER
ALARM
RUN
PRG
kW
Power
on
Power
on
Press
until appears.
Press
to set desired value.
Press
until
appears.
Press key.
Press key.
Press key.
Press key
to store the value.
*To run the motor, go
back to monitor mode
or basic setting mode.
Press key.
Press key.
（2）Function code appears.
（3） appears.
（4）Output current value
is displayed.
Press
until appears.
FUNC
FUNC
FUNC
FUNC
FUNC
STR
FUNC
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
機能
FUNC
記憶
STR
（4）
is displayed