Hitachi VM-2300A User Manual

11. After recording, slide ““VCR/CAM"” select switch
to" VCR”, and the camera/recorder will be now in
the stop mode.
“VCR/CAM” Select Switch
12. Press ““REW” button. The tape will be rewound to
the beginning.
13. Press PLAY” button. The picture you just re-
corded will be seen through the viewfinder and
sound can be heard by earphone (Not supplied).
NOTE: If you connect the camera/recorder to your
TV, you can see the picture played back on your
TV. Refer to “VIEWING THE PICTURE PLAYED
BACK ON YOUR TV” on page 36.
14. After playing, press “STOP” button.
“REW” Button
“PLAY” Button
15. Slide “POWER” ON/OFF switch to off and then
press “EJECT” button to remove cassette.
“POWER” ON/OFF Switch
“EJECT” Button
16. Always remove the power source from the
camera/recorder after use.
NOTE:
If
you
have
a
cassette
tape
that
has
already
been
partially
recorded
on
and
you
want
.
to
record
the
remaining
blank
section,
see
“QUICK
EDIT”
on
page
39.
ET3

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English