Hitachi VM-2300A User Manual

Accessory
Shoe
“BATTERY”
Release
Lever
Used
to
attach
the
DC
camera
light
(Accessory
Releases
the
battery
or
AC
adaptor/charger
at-
No.
8).
gf
tached
to
the
video
camera/recorder.
és
Earphone Speaker
(Only for VM-3300A)
When you record or play a tape in the
,,camera/recorder you can hear the audio
© through this speaker. To control the volume,
adjust the “SPEAKER” volume control located
on the bottom of the camera/recorder.
NOTE: If feed back noise (howling) occurs dur-
ing recording, turn the “SPEAKER” volume
control down and attach the optional earphone
to “EAR” phone jack to monitor the sound.
“MEMORY” Button
If this button is pressed while the linear time
counter or time remaining read-out is displayed
in the viewfinder, ‘’’M” appears in the display
" and it memorizes the tape position of
“0:00:00”.
(See page 27.)
“‘"NEGA/POSI” Switch
ase Normally set to “POSI’”.
© Set to “NEGA” for special effects as in a
negative film.
“FOCUS AUTO/MAN” Switch
Set this switch to the “AUTO” position for
automatic focusing, and to the “MAN” pos-
ition for focusing with the focus ring.
E15

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English