Hitachi YUTAKI S80 Series - Selecting an Installation Configuration; DHW Tank Configurations; Dimensions

25
PMML0291A rev.2 - 09/2014
INSTALLATION
ENGLISH
7.2 SELECTING AN INSTALLATION CONFIGURATION
7.2.1 DHW tank congurations
DHW tank has the following installation conguration possibilities with the YUTAKI S80 indoor unit:
A) Indoor unit with HITACHI tank
(Tank integrated over the indoor unit)
B) Indoor unit with HITACHI tank
(Tank beside the indoor unit)
IMPORTANT NOTE
• All the installation information about DHW connec-
tion is explained in this chapter.
• The installation information about the space heating
connection and indoor unit refrigerant / wiring con-
nection is explained in the section Indoor unit alone
(Without tank) of the YUTAKI S80 Installation and
operation manual.
Depending on the conguration type, the installation procedure will be different.
7.2.2 Dimensions
NOTE
• Height dimensions are shown with the minimum mounting
foot height. These values can be adjusted up to +30 mm.
• All dimension in mm.

Indoor unit with HITACHI tank (Tank integrated
over the indoor unit)
RWH-(4.0-6.0)FS(V)NFE +
DHWS195S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE +
DHWS260S-2.0H1E

Indoor unit with HITACHI tank (Tank beside the
indoor unit)
RWH-(4.0-6.0)FS(V)NFE + DHWS195S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE + DHWS260S-2.0H1E