Hitachi YUTAKI S80 Series - Removing the Covers; Removing the Domestic Hot Water Tank Covers

27
PMML0291A rev.2 - 09/2014
INSTALLATION
ENGLISH

Removing the tank lower front cover
1 Remove the tank lower front cover only by pulling it out.
NOTE
When reassembling, take into account that this cover is not sym-
metric. Upper and lower hooks are not at the same distance from
the upper and lower cover edges.

Removing the tank upper front cover
1 Open the LCD user’s interface service cover.
2 Unscrew the 2 screws with the nylon washers between the
screw and the cover.
3 Remove the tank upper front cover only by pulling it out.
NOTE
Take care, do not damage the
LCD when removing the serv-
ice cover.
7.3 REMOVING THE COVERS
7.3.1 Removing the domestic hot water tank covers
NOTE
Back cover, left cover, right cover and upper cover no need to be removed unless tank’s insulation wants to be removed.