Hitachi YUTAKI S80 Series - Service Space

26 PMML0291A rev.2 - 09/2014
INSTALLATION
7.2.3 Service space

Indoor unit with HITACHI tank (Tank integrated over the indoor unit)
A
>700 mm (1)
695 mm
>30mm
600 mm
>30 mm
>700 mm (1)
600 mm
695 mm
(1): e.box removal
A
>3
0mm
>30 mm
A : Service without this
space is available but is
recommended > 250 mm
for easy servicing
>250 mm
>250 mm
>250 mm
>30mm
>30 mm
>250 mm
NOTE: If there is no space at left and right side, could be necessary to disassemble the tank or the indoor units for some special
servicing (for example change the heat exchangers, etc)

Indoor unit with HITACHI tank (Tank beside the indoor unit)
100 mm
>700 mm (1)
695 mm
>3
0mm
600 mm
>30 mm
>700 mm (1)
600 mm
695 mm
>30mm
A
>30 mm
A : Service without this space is available but is
recommended > 250 mm for easy servicing
(1): e.box removal
A : Service without this space is available but
is recommended > 250 mm for easy servicing