Hitachi YUTAKI S80 Series - DHW Tanks Placing

42 PMML0291A rev.2 - 09/2014
INSTALLATION
1.1)
1.2)
2 Introduce the heating coil outlet pipe (960 mm tube length)
(3/4”) from outside of the tank (through the rear hole of the
tank) and connect the elbow end to the heating coil outlet con-
nection.
2.1)
2.2)
7.5.8 DHW tank’s placing
1 Lift up the tank and place it again in vertical position just be-
side the indoor unit (at its right or left side).
1.1)
1.2)