Hitron CGNV2 - Page 107

10
HITRON CGNV2 USER’S GUIDE
VPN
PPTP Client settings
Internet address (IP/
FQDN)
Use this field to enter the IP address or Fully-Qualified
Domain Name of your PPTP Client.
Enter Username Use this field to enter the username for your PPTP Client
Enter Password Use this field to enter the password for your PPTP Client.
PPP Encryption
(MPPE)
Use this field to select whether the PPP Encryption
(MPPE) be active or not.
Select Enabled to activate the PPP Encryption
(MPPE).
Deselect Enabled to deactivate the PPP Encryption
(MPPE).
Connect Click this to connect PPTP Client.
PPP Interface This displays PPTP Interface connection information.
PPTP Log This displays the PPTP section establish and
termination.
TABLE 36: The VPN > PPTP Screen (continued)