Discovery QDR Series Technical Manual
3-26
Figure 3-24. Table Alignment
Figure 3-25. Pedestal (covers removed)
5. Make sure the upper and lower brackets are securely fastened to the upper and
lower frames.
Note: Even if the brackets are secured to the frames, they may not be securely
fastened to the pedestal. If not, remove the table to access the screws that
.25” +/- .09”
63.125”
+/- .06”
FRONT & REAR
“A”
+/- .25”
“A”
T-Rail
Pedestal
Studs and
Adjustment Nuts
Upper Bracket
Lower Bracket
To Next Page
Loading...
