Holtek e-Link32 - 2 MDK_ARM (KEIL) Setup and Use; E-Link32;E-Link32 Pro for Keil Installation; Figure 6. Ht32_Setup_Keil_Vxx.exe Installation Introduction

Rev. 1.30 13 of 34 November 13, 2020
e-Link32/e-Link32 Pro User’s Guide
1 Overview 2 MDK_ARM (KEIL) Setup and Use
2 2
MDK_ARM (KEIL) Setup and Use
e-Link32/e-Link32 Pro for Keil Installation
The following steps show how to install the e-Link32/e-Link32 Pro for Keil:
▀
Double-click “HT32_Setup_Keil_vxx.exe” to open the Keil Boot program and press the “Yes”
button to continue.
Figure 6. HT32_Setup_Keil_vxx.exe Installation Introduction