Rev. 1.30 24 of 34 November 13, 2020
e-Link32/e-Link32 Pro User’s Guide
3 IAR Setup and Use
3 3
IAR Setup and Use
e-Link32/e-Link32 Pro for IAR Installation
The following steps show how to install the e-Link32/e-Link32 Pro for IAR:
▀
Double-click “HT32_Setup_IAR_vxx.exe” to open the IAR Boot program and press the “Yes”
button to continue.
Figure 27. HT32_Setup_IAR_vxx.exe Installation Introduction
To Next Page
Loading...