102
CLEANING AND FLUSHING
4. Disconnect the flush port
connector.
5. Screw the flush port connector onto
the garden hose.
6. Turn on the fresh water supply and
flush the outboard motor for at
least 10 minutes.
7. After flushing, disconnect the
garden hose and reconnect the flush
port connector.
8. Tilt up the outboard motor and
move the tilt lock lever to the
LOCK position.
FLUSH PORT
CONNECTOR
FLUSH PORT
CONNECTOR
FLUSH PORT
CONNECTOR
GARDEN HOSE
GARDEN HOSE JOINT
(Commercially available)
31ZZ36130.book Page 102 Tuesday, July 22, 2014 10:21 AM
To Next Page
Loading...
