Lubrication Points
Apply Honda Marine waterproof grease to the parts
shown below:
Lubrication interval:
After the first 20 hours or 1 month, then every 100 hours
or 6 months (refer to the maintenance schedule on page
78).
To prevent corrosion, apply anticorrosion oil to pivot
surfaces where grease cannot penetrate.
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover and any exposed metal
surfaces except the belts.
THROTTLE ARM/
LINK/PIVOT/PLATE THROTTLE ROD/LINK
TILLER HANDLE
(LHT type)
TILT SHAFT
UPPER SWIVEL CASE
LOWER SWIVEL CASEPROPELLER SHAFT
To Next Page
Loading...
