86
SERVICING YOUR OUTBOARD MOTOR
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p. 83)
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
2.7 US qt (2.6 L)
With oil filter change:
2.9 US qt (2.7 L)
5. Install the oil filler cap and tighten
it securely (p. 83).
6. Install and lock the engine cover.
Engine Oil Recommendations
Oil is a major factor affecting
performance and service life. Use
4-stroke detergent oil.
Honda 10W-30 FC-W
®
outboard
motor oil is recommended for general
use.
FC-W
®
is a registered trademark of
the National Marine Manufacturers
Association.
If Honda 10W-30 FC-W oil is not
available, Honda recommends that
you use API service category SG, SH
or SJ oil. The SAE oil viscosity and
service category are in the API label
on the oil container.
31ZZ36130.book Page 86 Tuesday, July 22, 2014 10:21 AM
To Next Page
Loading...
