26
CONTROLS AND FEATURES
Remote Control
(standard or optionally
applicable equipment)
For panel-mount or top-mount remote
control information, refer to the
instructions provided with the remote
control equipment.
Ignition Switch
The ignition switch controls the
ignition system and the starter motor.
Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the ON position when released
from the START position.
The ignition switch can be used to
start the engine only when the
gearshift/throttle control lever is in
the N (neutral) position (p. 52), and
the emergency stop switch clip is in
the emergency stop switch.
Turning the ignition switch to the
OFF position stops the engine.
Emergency Stop Switch Clip and
Emergency Stop Switch
EMERGENCY STOP
SWITCH
EMERGENCY STOP
SWITCH CLIP
OFF
ON
START
IGNITION
SWITCH
EMERGENCY
STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
31ZY06520.book Page 26 Friday, October 13, 2023 1:58 PM