34
CONTROLS AND FEATURES
(H type)
When the overheat protection system
is activated, the engine speed will be
reduced to 1,800 rpm. If the condition
persists for another 20 seconds, the
engine will shut off.
Refer to TAKING CARE OF
UNEXPECTED PROBLEMS,
on p. 108.
Engine overheating may be the result
of clogged water intakes.
Cooling System Indicator
Water should flow from the cooling
system indicator while the engine is
running. This shows that water is
circulating through the cooling
system.
If water stops flowing while the
engine is running, it indicates a
cooling system problem, such as
clogged water intakes, which will
cause engine overheating. Refer to
TAKING CARE OF UNEXPECTED
PROBLEMS, on p. 108.
The cooling system indicator port can
also become plugged.
31ZY06520.book Page 34 Friday, October 13, 2023 1:58 PM
To Next Page
