57
OPERATION
STOPPING THE ENGINE
Emergency Engine Stopping
To stop the engine in an emergency,
pull the emergency stop switch clip
out of the engine or emergency stop
switch by pulling the emergency stop
switch lanyard.
If the emergency stop switch is
activated while the engine is running,
the engine will shut down abruptly
and the boat will quickly decelerate,
potentially causing occupants and
objects to be thrown forward and/or
overboard.
If the emergency stop switch is
activated, the emergency stop switch
clip must be reinserted before the
engine can be restarted.
We suggest that you stop the engine
this way occasionally to verify that
the engine and emergency stop switch
are operating properly.
Turn the ignition switch key to the
OFF position (electric start type) after
verifying the engine or emergency
stop switch operation.
Normal Engine Stopping
EMERGENCY STOP
SWITCH LANYARD
PULL
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY STOP
SWITCH CLIP
PULL
31ZY06520.book Page 57 Friday, October 13, 2023 1:58 PM