81
SERVICING YOUR OUTBOARD MOTOR
3. Add oil through the oil drain hole
until it flows out the oil level hole,
then install the oil level screw and
the oil drain screw.
GEAR CASE OIL CAPACITY:
0.31 US qt (0.29 L)
Outboard motor SAE 90 hypoid
gear oil API Service category
(GL- 4)
OIL LEVEL SCREW TORQUE:
4.8 lbf·ft (6.5 N·m, 0.66 kgf·m)
Avoid losing more than 1 fl oz
(30 cm
3
) while reinstalling the
drain screw.
OIL DRAIN SCREW TORQUE:
4.8 lbf·ft (6.5 N·m, 0.66 kgf·m)
31ZY06520.book Page 81 Friday, October 13, 2023 1:58 PM
To Next Page
