Honda CH250 Elite 1986 User Manual

STEERING/FRONT WHEEL/BRAKE/SUSPENSION
INSTALLATION
'85:
120-150 N'm
(12.0-15.0 kg-m, 87-108 ft-Ibl
After '85
130-150 N'm
(13.0-15.0 kg-m, 94-108 ft-Ibl
I
Install the handlebar, aligning the tabs of the handlebar with
the grooves in the steering stem.
Apply Honda Bond A or Honda Hand Grip Cement (U.S.A.
only) to the inside the grips and to the clean surfac-
the left handlebar pipe. Wait 3-5 minutes
install the grips. for even application of
adhesive.
using.
•
Allow the adhesive to
NOTE
(2) LOCK NUT WRENCH, 30 x 32 mm
07716-0020400
--------
the steerirlO stem nut.
TORQUE: '85: 120-150 Nom
15.0 kg-m, 87 -1 08 ft-Ibl
After '85: 50 Nom
15.0kg"m, 94-108 ft-Ibl
Install and
14-4

Honda CH250 Elite 1986 Specifications

General

Engine Type	Single-cylinder, four-stroke
Displacement	244 cc
Bore x Stroke	72.0 mm x 60.0 mm
Compression Ratio	10.0:1
Fuel System	Carburetor
Ignition	CDI
Starting System	Electric
Transmission	Automatic
Final Drive	V-Belt
Front Suspension	Telescopic fork
Rear Brake	Drum
Front Tire	3.50-10
Seat Height	760 mm
Cooling System	Liquid-cooled