Honda CH250 Elite 1986 User Manual

ELECTRICAL EQUIPMENT
STARTI NG SYSTEM
STARTING CIRCUIT
! 1) MAIN FUSE
(2011.)
R
(21 IGNITION
SWITCH
G/R
(3) REAR BRAKE
SWITCH
(4) STARTER SWITCH
-
-
..
1
T VIR
{6ISTARTER MOTOR
R/W
a new one if there is no continui-
if you hear a click when starter button
ignition switph ON.
Yello\l\llrsld wire to the battery pOI~jth/e
battery terminal
"'''''''tir'' ,iir\) between the starter relay terminals.
Remove
the starter
Connect an ohlurrletE~r between the large starter
nals.
Disconnect the battery negative cable from the battery.
Disconnect the battery positive cable and starter motor cable
from the starter relay.
The relay coil
is
depressed
Remove the frame center cover (section 13).
Del>re~;s the rear brake pedal and turn the brake lock lever to
the "LOCK" pos,ition.
STARTER RELAY INSPECTION
16-8

Honda CH250 Elite 1986 Specifications

General

Engine Type	Single-cylinder, four-stroke
Displacement	244 cc
Bore x Stroke	72.0 mm x 60.0 mm
Compression Ratio	10.0:1
Fuel System	Carburetor
Ignition	CDI
Starting System	Electric
Transmission	Automatic
Final Drive	V-Belt
Front Suspension	Telescopic fork
Rear Brake	Drum
Front Tire	3.50-10
Seat Height	760 mm
Cooling System	Liquid-cooled