115
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Seat Belt
Reminder
Indicator
• Comes on if you are not wearing a
seat belt when you set the power
mode to ON.
• If the front passenger is not
wearing a seat belt, the indicator
comes on a few seconds later.
• Blinks while driving if either you or
the passenger has not fastened a
seat belt. The beeper sounds and
the indicator blinks at regular
intervals.
• Comes on for a while when the
rear seat belt is unfastened while
the power mode to on, and a red
icon is displayed on the driver
information interface.
• The beeper stops and the indicator
goes off when you and the passenger
fasten their seat belts.
• Stays on after you or the passenger
has fastened the seat belt - A
detection error may have occurred in
the sensor. Have your vehicle checked
by a dealer.
• When the seat belt has fastened, the
indicator will turn off and a green icon
is displayed on the driver information
interface.
2 Seat Belt Reminder P. 48
Low Charge
Indicator
(Amber)
●
Comes on when the High Voltage
battery is running low
(approximately 15% left).
●
Comes on - There is a decrease in
acceleration performance.
Recharge the High Voltage battery as
soon as possible.
20 2EX JSS (KE KG)-32TYF6000.book 115 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
