Honda E - Low Speed Braking Control

441
uuHonda SensinguLow Speed Braking Control
Continued
Driving
Low Speed Braking Control
The Low Speed Braking Control system has three functions: Low Speed Brake,
Collision Mitigation Throttle Control, and Rear Collision Mitigation Throttle Control.
Using sonar sensors located on the front and rear bumpers, the vehicle detects if
there danger of collision with a wall or other obstacle when the accelerator is
depressed with too much force, and the system assists in avoiding collisions and
reducing damage from impact by limiting power system output.
1Low Speed Braking Control
When trapped in a railway crossing, the system may
detect the crossing gate as an obstacle and activate.
If this happens, Low Speed Brake will automatically
cancel after a certain amount of time after stopping,
so continue to move forward. If Collision Mitigation
Throttle Control is activated, continue to calmly
depress the accelerator or depress the accelerator
once again, then push aside the crossing gate.
If the system is activated by curbs/parking curbs or
level differences on the road and you are unable to
park or clear them, turn the system off.
3 WARNING
It is not possible for the Low Speed Braking
Control system to avoid collisions or reduce
damage from collisions in all situations
where the accelerator has been depressed
accidentally or with too much force.
Over reliance on this system may result in a
collision and serious injury or death.
It is your responsibility to always check your
shift position, pedal location and
surroundings, and safely operate the
vehicle.
20 2EX JSS (KE KG)-32TYF6000.book 441 ページ ２０２０年３月６日 金曜日 午後６時５８分