Honda E - Inspecting and Changing Fuses

669
uuFusesuInspecting and Changing Fuses
Continued
Handling the Unexpected
Inspecting and Changing Fuses
1. Set the power mode to VEHICLE OFF
(LOCK). Turn headlights and all accessories
off.
2. Check the fuses on the battery inside the
bonnet.
u If the fuse is blown, have it replaced by a
dealer.
3. Remove the fuse box cover.
4. Inspect the small fuses inside the bonnet
and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace a fuse of the same specified amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage.
2 Fuse Locations P. 662
There is a fuse puller in the fuse box A inside the
bonnet.
a Blown
Fuse Box on the Battery
a Fuse Puller
20 2EX JSS (KE KG)-32TYF6000.book 669 ページ ２０２０年３月６日 金曜日 午後６時５８分