Honda E - If You Cannot Disengage the Charging Connector

673
Handling the Unexpected
If You Cannot Disengage the Charging Connector
■
When Appears on the Driver Information Interface
appears on the driver information interface when you cannot disengage the
charging connector.
Disengage the charging connector as follows.
1. Make sure that charging is completed
correctly.
2. Pull down the release cord which is located
under the glove box.
u The release cord returns to its original
position at the next charging.
3. The charging connector to disengage it
from the inlet.
■
If the Remote Battery Is Weak
The charging connector cannot be disengaged if the door is locked while the keyless
remote cannot be detected, such as when the battery is weak.
You can disengage the charging connector by pressing the release button in the
inlet by unlocking the door with the built-in key.
2 Replacing the Button Battery P. 620
2 If the Keyless Remote Battery is Weak P. 649
■
What to Do If Unable to Disengage the Charging Connector
1If You Cannot Disengage the Charging Connector
If the problem that you cannot disengage the
charging connector occurs repeatedly, contact a
dealer to have the vehicle checked.
a Release Cord
20 2EX JSS (KE KG)-32TYF6000.book 673 ページ ２０２０年３月６日 金曜日 午後６時５８分