137
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Message Condition Explanation
• Appears when you change to (N, and press the
POWER button within five seconds.
• The shift position remains in (N for 15 minutes, then
automatically switches to (P.
2 If you want to keep the transmission in (N
position (car wash mode) P. 391
• Appears when the vehicle is stopped with the
driver’s seat belt unfastened and there is a chance
that the vehicle may roll unintentionally.
• Press the (P button before releasing the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 388
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
• Appears when the High Voltage battery and other
system control temperatures are too low to operate
(approx. −30°C or below).
• You must wait for an increase in the ambient
temperature or move the vehicle to a warmer location.
• Contact a dealer if necessary.
20 2EX JSS (KE KG)-32TYF6000.book 137 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page