Continued
399
uuWhen DrivinguSingle Pedal Control
The system can be turned ON and OFF when the driver's seat belt is fastened, the
power mode is set to ON, and the switch is pressed.
u When the system is ON, the deceleration
stage and indicator will display on the
gauge.
The system will automatically turn off when
you set the power mode to VEHICLE OFF
(LOCK).
You can turn the system ON and OFF while
driving.
When the vehicle is stopped, you can turn the
system ON and OFF by fully depressing the
brake pedal.
Situations when the system cannot be turned
on:
• The vehicle accelerates/decelerates
repeatedly.
• The vehicle is on a long downward slope.
• When driving for a long time with a heavy
load.
• Honda Parking Pilot
*
is in use.
• The parking brake and brake system
indicator (amber) is on.
■
Turning the System On and Off
1Single Pedal Control
Change the shift position to
(P and turn off the
system as well as make sure that the parking brake is
actually engaged in the following situations:
• When people get in and out of or when removing
luggage from the vehicle.
• When stopping for a long time.
• When going through a car wash.
• When using a car turntable.
Do not remove your foot from the brake
pedal on steep slopes or slippery surfaces.
On steep slopes and slippery surfaces, the
car may move if you remove your foot from
the brake, even if Single Pedal Control is in
use.
If a vehicle moves unexpectedly, it may
cause a crash, resulting in serious injury or
even death.
a Single Pedal Control Indicator
b Deceleration Paddle Selector
Indicator
* Not available on all models
20 2EX JSS (KE KG)-32TYF6000.book 399 ページ 2020年3月6日 金曜日 午後6時58分