Continued
425
uuWhen DrivinguBlind spot information System
*
■
When the system detects a vehicle
Blind spot information System Alert Indicator:
Located under the side camera mirror system
display.
Comes on when:
• A vehicle enters the alert zone from behind
to overtake you with a speed difference of
no more than 50 km/h (31 mph) from your
vehicle.
• You pass a vehicle with a speed difference
of no more than 20 km/h (12 mph).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction
of the detected vehicle. The beeper sounds
three times.
1Blind spot information System
*
Blind spot information system may be adversely
affected when:
• Objects (guard rails, poles, trees, etc,.) are
detected.
• An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
• Driving on a curved road.
• A vehicle is moving from a far lane to the adjacent
lane.
• The system picks up external electrical interference.
• The rear bumper or the sensors have been
improperly repaired or the rear bumper has been
deformed.
• The orientation of the sensors has been changed.
• In bad weather (rain, snow, and fog).
• Making a turn at an intersection.
• Driving on a bumpy road.
• Making a short turn that slightly tilts the vehicle.
For a proper blind spot information system operation:
• Always keep the rear bumper corner area clean.
• Do not cover the rear bumper corner area with
labels or stickers of any kind.
• Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.
* Not available on all models
20 2EX JSS (KE KG)-32TYF6000.book 425 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
