Honda E - Page 482

481
uuHonda SensinguRoad Departure Mitigation System
Continued
Driving
You can switch the system on and off from the audio/information screen.
2 Driver Assist System On and Off P. 326
You can also turn the system on and off by the
following procedure:
1. Press the button on the steering wheel.
2. Roll the left selector wheel and select
Safety Support, then press the left
selector wheel.
3. Roll the left selector wheel and select Road
Departure Mitigation, then press the left
selector wheel.
u The message appears on the driver
information interface when the system
becomes on or off.
u A tick appears in the box and the colour
of the symbol changes green when
the system is on. The tick disappear and
the colour of the symbol changes
gray when the system is off.
The Road Departure Mitigation system is
turned on every time you turn the power
system on, even if you turned it off the last
time you drove the vehicle.
■
Road Departure Mitigation On and Off
20 2EX JSS (KE KG)-32TYF6000.book 481 ページ ２０２０年３月６日 金曜日 午後６時５８分