536
uuMulti-View Camera
*
uMulti-View Camera System Limitations
Multi-View Camera System Limitations
The system may not work properly under the following conditions.
Conditions Solutions
The projection line is not accurate. Have your vehicle checked by a dealer.
The images may not
appear clearly when:
●
You activate the system in bad weather (heavy rain,
snow, fog, etc.) or in the dark.
●
Camera temperatures are high.
●
A sudden change between light and dark such as an
entrance or exit of a tunnel.
●
You drive into the sunlight (e.g., at dawn or dusk.)
●
A camera lens is scratched.
Do not use the multi-view camera system but rely only
on visual confirmation until the conditions allow the
system to work properly.
●
A camera lens is covered with dirt, moisture, or
debris.
●
When water drops or insects get on the camera lens.
Clean camera lenses with a soft cloth moisturised with
water, mild detergent or glass cleaner.
●
The audio/information screen is dirty. Wipe off the screen using a soft dry cloth.
A camera angle is
altered.
A camera or the area around the camera has been
severely impacted.
Do not use the multi-view camera system and contact a
dealer.
An error message is displayed while the multi-view camera system is in use.
The image does not come on the screen when you press the CAMERA button
on the audio/information screen and the vehicle is moving at 20 km/h (12 mph)
or slower.
20 2EX JSS (KE KG)-32TYF6000.book 536 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
