Honda E - Page 550

Continued
549
uuHonda Parking Pilot
*
u
Driving
4. Press the Honda Parking Pilot switch while
depressing the brake pedal.
u When in operation, the system will beep
and will blink in blue in the upper
left of the display.
u The shift position will change depending
on the direction in which the vehicle is
moving.
5. Check your surroundings, the route on the
screen, and stopping position, then release
the brake pedal.
u The vehicle will start to move. Adjust
your speed with the brake pedal if
necessary.
u When you have finished parking, the
shift position will change to
(P and the
parking brake will automatically engage.
u Parking operation is complete
message will display, then it will return to
the previous screen.
u Adjust the parking location or position if
needed.
u After parking, confirm the shift position
is in
(P.
1How to enter a parking space
After the system begins to operate, if there is an
obstacle in your path, stop the vehicle with the brake
pedal, press the Honda Parking Pilot switch and stop
operation.
After the vehicle moved close to the target position,
it may be possible that the vehicle move again to
adjust the vehicle position.
Pay attention to the surroundings and stop the
vehicle if needed.
You can stop the parking brake from automatically
engaging after parking has finished.
2 Customized Features P. 327
a (blue)
20 2EX JSS (KE KG)-32TYF6000.book 549 ページ ２０２０年３月６日 金曜日 午後６時５８分