645
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
Continued
You can use the kit to inflate a non-punctured under-inflated tyre.
1. Take the air compressor out of the
luggage area.
2. Place the kit, face up, on flat ground near
the flat tyre, away from traffic. Do not
place the kit on its side.
3. Remove the valve cap.
4. Attach the hose onto the tyre valve. Screw
it until it is tight.
u Make sure the air valve is closed.
5. Plug in the compressor to the accessory
power socket.
u Be careful not to pinch the cord in a
door or window.
2 Accessory Power Socket P. 243
6. Turn on the vehicle's power system.
■
Inflating an Under-inflated Tyre
a Plug
b Accessory Power Socket
20 2EX JSS (KE KG)-32TYF6000.book 645 ページ ２０２０年３月６日 金曜日 午後６時５８分
To Next Page
Loading...
